+86-535-6828829info@wrsolidtire.com

Categories

Home > Knowledge > Content

Industrial Solid Tires Adapt to Low speed

Yantai Wonray Rubber Tyre Co.,Ltd | Updated: Nov 06, 2017

Solid tire is a kind of tire that does not need to inflate, in addition to not needing to inflate, solid tire also does not need to fill liquid, sponge or other not solid material, Industrial Solid Tires it is pure rubber product, it is commonly used under high load.

Fiber glue is generally a solid tire base rubber, this material can greatly reduce the thermal performance of solid tires. However, the fetal body heat is too high, Industrial Solid Tires it will produce swelling phenomenon, which leads to the condition of the tyre slip ring.

But the fiber glue is very important to restrain the phenomenon of the slip ring, its rigidity is good, the hardness is big, the stiffness is good, the deformation is small, Industrial Solid Tires the expansion coefficient is small, the low heat and so on has the advantage to eliminate the solid tire's slip circle phenomenon.

Due to the aging of rubber inside the tyre and the mishap caused by the use process, solid tires tend to be prone to falling blocks and cracks.

In order to avoid the occurrence of this phenomenon, Industrial Solid Tires it is necessary to carry out regular inspection and maintenance of solid tires, in addition, in the face of potholes and relatively stiff stones or metal objects in time to avoid.

The phenomenon of circumferential cracks or delamination between rubber is called delamination, which is also one of the common problems of solid tires, Industrial Solid Tires if the glue contains moisture and impurities or fiber glue in the storage and transportation process by rainwater, debris pollution when the solid tires easily occur delamination phenomenon.

In addition, solid tires of fetal embryo insulation, fetal embryo forming too early, overload, speeding and other factors are caused by the phenomenon of solid tire delamination, Industrial Solid Tires which requires the relevant personnel in the solid tire storage and vehicle driving process in a lot of attention.

Solid tires are generally divided into two types of bonding and unbonded, the former refers to the rubber directly vulcanized on the rims of the tires, the latter refers to the tire after vulcanization fixed on the rims.

According to the shape of the cylindrical solid tires and inclined bottom type solid tires two, according to the use of anti-static, conductive type, oil-resistant, Industrial Solid Tires high load solid tires, environmental protection without trace solid tires.

Solid tires are generally used under high load, Industrial Solid Tires requiring the adhesive to have enough pressure resistance and wear resistance, with sufficient high tensile stress, high hardness, low permanent deformation and good abrasion resistance.

Solid Tyre is a kind of industrial tyre, Industrial Solid Tires which is suitable for running vehicle under low speed and high load, and its safety, durability and economy are obviously superior to inflatable tyre, which is widely used in various industrial vehicles, military vehicles, construction machinery, and towing vehicles in port airports.


Previous: No Information

Next: Cushion Press on Tires Smooth surface