+86-535-6828829info@wrsolidtire.com

Categories

Home > News > Content

Processing Technology Of Tire Mould

Yantai Wonray Rubber Tyre Co.,Ltd | Updated: Oct 13, 2014

The tire mold mainly refers to the automobile tire, along with the unceasing progress of the society, the automobile industry is in full swing development, the automobile unceasing demand also promoted the automobile related industry development, like washes the car, the automobile mold, the tire, the automobile fitting and so on, these related professions in the Automobile Industry Foundation, all developed very well. Today is mainly about the automobile tire mold related knowledge.

Tire mold types have a lively mold, Mould on Tires from the pattern circle, mold sets, the upper and lower side of the plate, the active mold to distinguish the cone-oriented mold and oblique plane-oriented mold. There are two halves of the mold, from the upper die, the lower mold two pieces. The following is a brief description of his processing technology: according to the tire mold drawing casting or forging blanks, Mould on Tires and then rough cars and heat treatment. The tire mold Blank carries on the complete annealing treatment, eliminates the internal stress, the annealing should put on the flat, avoids the distortion too big; according to the drawing hole, then according to the half fine car drawing the outside diameter and the height of the pattern circle processing in place, Mould on Tires with the half fine car program car pattern circle cavity, semi-precision car model inspection, with the processing of the tire mold pattern electrode patterns with EDM molding, with a model inspection, the pattern circle according to the requirements of manufacturers are divided into several parts, draw out the marking line, put in the fixture to play back waist hole and tapping In accordance with the equal parts of the process 8, cut at the line; Mould on Tires cut the pattern of good pieces according to the drawings required for the pattern of light, clear angle, Qinggen, hit the exhaust hole, the pattern block cavity evenly sprayed sand, the color uniformity, the pattern circle, the mold sleeve, the upper and lower side plate combined assembly to complete the tire mold.

Tire mold types have a lively mold, from the pattern circle, mold sets, Mould on Tires the upper and lower side of the plate, the active mold to distinguish the cone-oriented mold and oblique plane-oriented mold. There are two halves of the mold, from the upper die, the lower mold two pieces. The following is a brief description of his processing technology: according to the tire mold drawing casting or forging blanks, and then rough cars and heat treatment. The tire mold Blank carries on the complete annealing treatment, eliminates the internal stress, Mould on Tires the annealing should put on the flat, avoids the distortion too big; according to the drawing hole, then according to the half fine car drawing the outside diameter and the height of the pattern circle processing in place, with the half fine car program car pattern circle cavity, semi-precision car model inspection, with the processing of the tire mold pattern electrode patterns with EDM molding, with a model inspection, the pattern circle according to the requirements of manufacturers are divided into several parts, Mould on Tires draw out the marking line, put in the fixture to play back waist hole and tapping In accordance with the equal parts of the process 8, cut at the line; cut the pattern of good pieces according to the drawings required for the pattern of light, clear angle, Qinggen, hit the exhaust hole, the pattern block cavity evenly sprayed sand, the color uniformity, the pattern circle, the mold sleeve, the upper and lower side plate combined assembly to complete the tire mold.